The 112mm Brick Reinforcement Mesh (20m Roll) is a continuous structural steel coil engineered for embedding directly within the mortar beds of standard brickwork and blockwork. It is widely specified by builders and structural masons to significantly enhance the tensile strength of masonry panels, minimize shrinkage cracking around door and window openings, and help distribute localized loads evenly across wider walls.
Manufactured from high-grade galvanized steel, the mesh offers robust long-term protection against rust and corrosion when encased within wet mortar. The welded wire configuration provides high structural rigidity while remaining flexible enough to unroll smoothly along a masonry course. The 112mm width is specifically tailored for standard blockwork or wider brick configurations, ensuring it sits completely concealed within the mortar joint without compromising the overall masonry bond or joint thickness.
Supplied in a convenient 20-meter roll, it can be quickly measured, cut to length on site using wire snips, and laid flat into fresh mortar beds with minimal waste. Fully compliant with relevant British and European standards (such as BS EN 845-3), this professional-grade reinforcement mesh delivers dependable structural integrity and crack control for residential and commercial masonry projects.
 
Installation:
All metal components used in any particular application must be of the same material type.
Gloves should be worn to protect hands from sharp metal edges.
Position the mesh within the masonry bed joints, providing a minimum of 25mm cover to external faces.
Overlap by a minimum of 75mm if joining two lengths together. The mesh can be laid every third brickwork course for most reinforcement.