Products
> For The Home >
E-Cloths > How
to Use E-Cloths
How
to use the E-Cloth™ Cleaning System
All
our products in the E-Cloth™ range can be used
in the same way - with just water. There
is no impregnation in any of our products and
you do not need to use any chemicals when using
our system. The E-Cloth™ can be used in a variety
of ways to maximise their effectiveness:
| 1. |
Wet:
start wet for cleaning e.g. the car or
the bath. Finish off damp. |
| 2. |
Damp:
for all other surfaces - wet the cloth
completely, wring out all excess water,
fold and wipe all surfaces clean. |
| 3. |
Dry:
for dusting only - drag the folded cloth
across the surface. Dust is magnetised
to the cloth. |
How
to maintain your E-Cloths
| 1. |
When
dirty, our products can be washed at least
300 times. Either put them in a wash bag
with your normal washing, or alternatively,
boil them on the hob. |
| 2. |
In
order for the cloths to perform correctly,
they need to be kept clean with regular
washing. They should be hot, boil washed
at 90° in order to kill bacteria. NB.
Initial washes should be at 60°. |
| 3. |
Always
wash the cloths separately from other
items to avoid adding fluff to the cloth. |
| 4. |
Do
not use fabric softener or bleach. The
fabric softener removes the static effect
for dry use and bleach breaks down the
micro fibres. |
| 5. |
Either
tumble dry or hang dry. If too much washing
powder is used, the fibres become blocked
and the performance of the cloth is reduced.
Wash the cloth a few times without any
washing powder to remove the excess soap. |
|
