F Ball Stopgap 300 HD - Heavy Duty Floor Smoothing Underlayment

A rapid hardening, water mix smoothing underlayment. It is designed for use on both absorbent and non-absorbent interior subfloors, in areas that are subjected to heavy-duty trafficking.

The underlayment has excellent smoothing properties making it suitable for application by mechanical pump or by traditional mixing methods. It is protein free ensuring it is suitable for biologically sensitive areas. For thickness above 10mm, Stopgap Graded Aggregate is recommended for economy.

Available in: 25kg bags

Level Master Self Levelling Compound

A casein-free, water based cementitious flooring compound that provides a level base for internal floors. An ideal economical underlay for all modern floor finishes. NOTE: This product is not suitable as a final wearing course. Sets hard within 2 - 3.5 hours depending on temperature.

Available in: 25kg bags

Level Master Latex Liquid

A polymeric, liquid latex for use with LevelMaster Self-Levelling Compound. Will improve adhesion and wearing properties. Suitable for use on concrete, well braced timber, mastic asphalt and quarry tiles. Casein-free.

Available in: 5L

Liquid Mortar Plasticiser

A chemically balanced plasticiser, based on synthetic air entraining agents, designed to improve workability of brick laying and plastering mortars and increases their resistance to freeze-thaw cycles. Reduces the risk of cracking and crazing and the need for lime. Conforms to BS4887:1986 pt 1. Also available on special request, the original wood resin blend.

Available in: 5L

Brick & Patio Cleaner

A powerful acid based (9%) cleaner that will remove cement and mortar splashes, grime, oil, grease and other difficult-to-remove stains, from brick work, patios, garages, paving, concrete floors and warehouses.

Available in: 5L

Frostproofer & Rapid Hardener

A high performance building chemical that increases frost resistance and accelerates setting time of cements by improving the rate of hydration. Specially developed for brick laying and rendering, etc. At low and sub-zero temperatures. Added to the mix, this product will improve workability and increase strength gain and resistance to water penetration. It allows up to a 15% reduction of gauging water, and can also reduce curing times and shrinkage. Chloride-free.

Available in: 5L

Intergral Waterproofer

A high strength cement waterproofer for internal and external rendering, roof screeds, swimming pools, tanks, retaining walls, basement walls and reservoirs. Improves workability and plasticity of concrete and mortar in the wet state and resists water penetration even under pressure.

Available in:5L

Dustproofer & Hardener

A premium quality, chloride-free, low viscosity liquid that penetrates and chemically seals concrete. Produces a hard wearing, non-dusty surface. Suitable for use on garage, warehouse, factory or workshop floors.

Available in: 5L

Plasterer's Pregrit

A ready to use plaster bonding agent wih added aggregate to provide a key when plastering on smooth surfaces. Contains sand/aggregate to provide plaster key. Ready to use, one coat application. Perfect for use on smooth substrates. Pigmented yellow to identify treated areas. Should be used as a primer/ bonding aid prior to plastering on surfaces such as concrete, plaster and difficult, low or non-porous substrates.

Available in: 10L tub

Cement Colour

A range of easy-to-use, chloride-free permanent cement colourants. Can be used to pigment cement, mortar, concrete and renderings. Conforms to BS1014.

Available in: 1kg in Black, Red, Yellow or Brown

Mould Release Oil

A chemical release agent for mould and shutter surfaces prior to casting concrete, giving a clean release. After removal of formwork the convrete will have a small uniform hard finish with reduced incidence of blow holes.

Available in: 5L or 25L